Changzhou Match-Well Electrical Products Co., Ltd.

match-well low pressure control

match-well low pressure control
Product Detailed

This kind of pressure switch was put insidereversible stainless steel motion diaphragm turns over when inducing some pressure.

Product Specifications 

    *Adopting Eng.thread quick connector(copper flare connection) or brass tube welding fitting structure,flexibly  setting,easy to use and no special need for mounting and fixing.

   *Plugging or wiring connection disigned to customer's chioce.

   *SPST connection,normal open or normal close structure to customers'chioce.

   *Security and reliability by adopting fusion welding stainless steel pressure inductor and full air-tight connection.

   *Any pressure value within -14.5~750PSI(-0.1Mpa~5.17Mpa) can be made based on customers' requirement.

   *Pre-set pressure parameter before delivery allows derect use without resetting on the customers' site.

 

 Typical Outline Drawing

 

Operating Principle

   The series of pressure control are based on the theory that an inside recersible stainless steel motion diaphragm turns over when inducing certain pressure.

   The electric contact opens or choses with the leader when the diaphragm moves. The switch resets automatically when induced pressure reduces below rated value.

 

Typcal structure Drawing

 

Designed Parameter

  *Working pressure range:-14.5~750PSI(-0.1Mpa~5.17Mpa)

  *Burst Pressure:5000PSI

  *Ambient temperature:-30°C~+120°C

  *Life cycles under the rated electric current: 30000times,500000times and 100000times optional

  *Electrical Rating:At24VAC,normal electric capacity:125VA At 120/240Vac,normal electric capacity:375VA

 



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.